Tuesday, May 8th, 2007
I’ve always been impressed with Foundry’s Web Switch Management cards (WSM) for the ServerIron series of application load balancers (layer 4-7). And my customers rave about them too. They have the same ease-of-use and robust load balancing feature set as the ServerIronXL stackable (and then some), but with substantially more performance and flexibility. They feature 3 processing subsystems (except for the rare -1 version, which has only one), in addition to the separate management portion. This starts one out with triple the performance of a ServerIronXL, and gives some fault tolerance to the card as well.
Additionally, the WSM series goes into modular chassis, so I/O port cards can be selected to give you precisely the port type and count you need. The chassis also allows for more redundancy options within the unit (power, dual WSM, extra port cards etc.)
I was excited to get a WSM6 (SI-GT series) and couple NEW WSM7 in stock recently. The WSM7 particularly is amazing, and is called their “ultra-performance” WSM. It has 3 x 1.6Ghz processors’ for the load balancing, all with 512MB at their disposal. It can go into 3-slot GT chassis, 4 slot ServerIron 400 and 450 chassis, and 8-slot ServerIron 800 and 850 chassis. We have all these combinations and all the port cards too (J-B16GC, J-B16Gx, J-B48E etc). These are amazing units.
About the WSM7:
· Concurrent Sessions 15,000,000
· Application Throughput 6 Gbps
· L4 Connection Performance (CPS) 170,000
· Layer 7 Connection Performance (CPS) 60,000
· DDoS & DoS (SYN Flood) Protection (SYN/Sec) 5 million
· Base Layer 3 Features Supports servers on different subnets from that of Virtual IP address
more about the WSM7 can be found here:
Anyhow, both the WSM6 and WSM7 are state-of-the-art load balancers, and I am offering them at huge discounts, and of course with 1 year warranty. The WSM4 is still VERY capable, and represents a tremendous value at the price point. Also, I can offer TechNet support from Foundry to give you access to software updates and technical support for any models. Enhanced support packages also available. Contact me to discuss!
Brian Stadtmiller
brians@townsendassets.com
Technical Sales Manager
Phone: 415-626-4231 Ext. 230
AIM: bstaginc
Share This
Thursday, May 3rd, 2007
We’re offering a special on Foundry Jetcore THIS MONTH!!
B4000, Dual A/C with J-BxGMR4: $4895.00/each
J-BxGMR4: $4500
J-B16GC: $3000
J-BxG: $2500
THIS MONTH ONLY!!!!
Peter Gilberd , VP of Sales
aim: pgtaginc email peterg@townsendassets.com tel: 415-626-4231 x224
Share This
Thursday, April 5th, 2007
I have 20+ Cisco 2611XM Multiservice Routers. Volume pricing available.
Greg Lesko, Enterprise Sales
aim: gltaginc skype:greg.lesko email: greg@townsendassets.com tel:415-626-4231 x227
Share This
Thursday, April 5th, 2007
Just closed a deal and ready to move Qty. 50 + Cisco WS-C2950-24 units. Volume pricing available.
Greg Lesko, Enterprise Sales
aim: gltaginc skype: greg.lesko email greg@townsendassets.com tel: 415-626-4231 x227
Share This
Thursday, April 5th, 2007
http://www.dslforum.org/aboutdsl/shdsl_faq.html
Qty. 50+ Cisco WIC-1SHDSL 1-Port G.SHDSL WIC units. Volume pricing available.
Greg Lesko, Enterprise Sales
aim: gltaginc skype: greg.lesko email greg@townsendassets.com tel: 415-626-4231 x227
Share This
Thursday, March 15th, 2007
Townsend Assets group recently closed a sizable Cisco liquidation in Europe. We currently have the following gear in stock and ready to ship anywhere on the globe.
CISCO2801
VIC-4FXS/DID
VIC2-4FXO
CISCO2801-SRST/K9
WS-C3560-48PS-S
CISCO2851-SRST/K9
CP-7905G
CP-7914
Call (866) IT-ASSET for a quote today! We have QTY of this equipment in NEW, Used and New Open Box condition.
Share This
Wednesday, February 7th, 2007
Well, as we all know the Foundry MG8 is a big league switch/router, normally reserved for operations with huge budgets and lots of traffic. This is no longer the case since it is, as of this writing, available used! That’s right, used. If you haven’t seen the light and are stuck on buying new only, you may navigate away from this page now. But for those of you who realize a used router makes all kinds of economic and practical sense, and is for all intents as good as a new router, read on…..
We just shipped two well-optioned used MG8’s to our customer (a service provider) in the Netherlands, who is very pleased with their performance and features. A state-of-the-art switch fabric, high performance backplane and supervisor engine, 10GbE port density, and redundancy were all critical decisions for this customer. They also needed to keep within a budget. Mission accomplished.
The items we have available at this time are:
BIMG8-AC
BIMG8-MR
BIMG8-SFM
BIMG8-10GX4-V6-A
BIMG8-1GX20-SFP-V6
BIMG8-1GX40-SFP-V6
Feel free to contact me if you would like to consider deploying the Foundry MG8, and we can option and price one for you. Below is a fluffy blurb from Foundry on the MG8.
Brian Stadtmiller, Technical Sales Manager
aim: bstaginc skype: brian.stadtmiller email brians@townsendassets.com tel: 415-626-4231 x230
- Wire-speed 480-Mpps routing performance with distributed, non-blocking 1.28-Tbps switching architecture
- Extensive, scalable IPv4/IPv6 protocol support with up to 200 BGP peers and 2 million BGP routes, and hardware routing of IPv4 and IPv6 traffic
- sFlow Layer 2-4 traffic monitoring for Ethernet, IPv4 and IPv6
-
- Each of the interface slots in the BigIron MG8 supports 40-Gbps of full duplex, non-blocking traffic forwarding. This allows for wire speed switching of 4 10-GbE or 40 1-GbE ports across the switching fabric, as well as locally on the module.
- The MG8 incorporates the industry’s highest performance, non-blocking, distributed switching architecture with a parallel cross-point switch fabric providing up to 640-Gigabits per second of switching throughput, and 480 million packets per second switching performance.
- Need more details? http://www.foundrynet.com/products/enterprise/agg-bb-l23/bi-mg8.html
-
Share This
Friday, December 1st, 2006
We have updated our website to reflect some of the newer Cisco Catalyst products that we have available. They are as follows:
Catalyst 2950
WS-C2950-12
WS-C2950-24
WS-C2950C-24
WS-C2950G-12-EI
WS-C2950G-24-EI
WS-C2950G-24-EI-DC
WS-C2950G-48-EI
WS-C2950SX-24
WS-C2950SX-48-SI
WS-C2950T-24
WS-C2950T-48-SI
WS-C2955C-12
WS-C2955S-12
WS-C2955T-12
Catalyst 3550
WS-C3550-12G
WS-C3550-12T
WS-C3550-24-DC-SMI
WS-C3550-24-EMI
WS-C3550-24-FX-SMI
WS-C3550-24-SMI
WS-C3550-24PWR-EMI
WS-C3550-24PWR-SMI
WS-C3550-48-EMI
WS-C3550-48-SMI
Catalyst 3560
WS-C3560-24PS-E
WS-C3560-24PS-S
WS-C3560-24TS-E
WS-C3560-24TS-S
WS-C3560-48PS-E
WS-C3560-48PS-S
WS-C3560-48TS-E
WS-C3560-48TS-S
WS-C3560G-24PS-E
WS-C3560G-24PS-S
WS-C3560G-24TS-E
WS-C3560G-24TS-S
WS-C3560G-48PS-E
WS-C3560G-48PS-S
WS-C3560G-48TS-E
WS-C3560G-48TS-S
Catalyst 3750
WS-C3750-24PS-E
WS-C3750-24PS-S
WS-C3750-24TS-E
WS-C3750-24TS-S
WS-C3750-48PS-E
WS-C3750-48PS-S
WS-C3750-48TS-E
WS-C3750-48TS-S
WS-C3750G-12S-E
WS-C3750G-12S-S
WS-C3750G-16TD-E
WS-C3750G-16TD-S
WS-C3750G-24PS-E
WS-C3750G-24PS-S
WS-C3750G-24T-E
WS-C3750G-24T-S
WS-C3750G-24TS-E
WS-C3750G-24TS-E1U
WS-C3750G-24TS-S
WS-C3750G-24TS-S1U
WS-C3750G-48PS-E
WS-C3750G-48PS-S
WS-C3750G-48TS-E
WS-C3750G-48TS-S
Catalyst 4500
WS-C4503
WS-C4503-S2+48
WS-C4506
WS-C4506-S2+96
WS-C4507R
WS-C4510R
WS-C4840G
WS-C4908G-L3
WS-C4912G
WS-F4531
WS-X4012
WS-X4013
WS-X4013+
WS-X4013+/2
WS-X4013+TS
WS-X4014
WS-X4515
WS-X4515/2
WS-X4516
WS-X4516-10GE
WS-X4516-10GE/2
WS-X4516/2
Call us today for a quote!
Chris Hill
Townsend Assets Group
550B Townsend Street
San Francisco, CA 94109
Office: 415-626-4231 x 226
Mobile:310-502-8090
Fax: 415-626-4063
AIM: cphtag
chris@townsendassets.com mailto:chris@townsendassets.com
www.townsendassets.com
Share This
Friday, November 3rd, 2006
Got a few new Cisco pieces in stock:
WS-CAC-3000W: 3000w power supply for a Catalyst 6500
GSR8/40: Cisco 12008 Router
Call us for pricing, and availability.
Share This
Monday, October 16th, 2006
We have a pending deal for a bunch of XMR routers that is on the verge of closing. This is the first time we will be able to get this relatively new model in stock and we are currently taking orders to reserve units for select customers. If you want one of these babies, send us an email or give us a ring. They will be gone as quickly as they came.
1-888-IT-ASSET or email
Share This