866-IT-ASSET | Email

 

Brocade FastIron SX Series

 

fastiron sx
Brocade FastIron SX family of Layer 2/Layer 3 switches provide a superior scalable foundation for better operational efficiency and faster response to business opportunities today and into the future.

The FastIron SX family extends control from the network edge to the core with intelligent network services, including superior quality of service (QoS), predictable performance, advanced security, comprehensive management, and integrated resiliency. Additionally, the FastIron SX family offers compatibility in a common operating system, and a shared interface and power supply modules reduce the cost of ownership by minimizing operational expenses and improving return on investment (ROI).

The FastIron SX family has an extensive feature set, making it well suited for real-time collaborative applications, IP telephony, IP video, e-learning, wireless LANs, and raising the organization’s productivity. The FastIron SX family delivers wire-speed performance and ultra low latency, which are ideal for converged network applications such as VoIP and video conferencing. These platforms present the industry’s most scalable and resilient PoE design, with a robust feature set to secure and simplify the deployment of an edge-to-core converged network. In addition, the FastIron SX family supports high-density 10 Gigabit Ethernet for enterprise backbone deployments.

Future-proofing the Network with IPv6

Migration to IPv6 is inevitable, but by starting with the deployment of IPv6-capable hardware the transition can be more controlled and less disruptive to the network. Japan and Europe are aggressively deploying IPv6, and deployment in North America is on the rise. In fact, some government agencies are mandating the purchase of IPv6-capable switches and routers. Therefore, it is important that enterprises plan to deploy IPv6-capable devices to capitalize on this inevitable change.

The Brocade IPv6-capable FastIron SX family combined with other Brocade products such as BigIron® and NetIron®, provides the industry’s most complete end-to-end IPv6 solution. Customers can deploy the FastIron SX family switches knowing it is IPv6-capable hardware today, and that future separately priced software upgrades will support IPv6 routing and advanced IPv6 features tomorrow.

The new IPv6-capable FastIron SX family switches enable network managers to future-proof the network to support IPv6. These high performance, IPv6-ready platforms deliver security, convergence, and complete IPv4/IPv6 visibility using embedded sFlow for a robust edge-to-core IPv6 solution. Migration to IPv6 is inevitable. By starting early with the deployment of IPv6-capable hardware, the transition can be more controlled and less disruptive to the network.

Configuration Alternatives

The FastIron SX family of switches is optimized for flexibility with upgradeability for PoE/PoE+, redundant management, switch fabric and power, and 10 Gigabit Ethernet. Available in three chassis models, the scalable FastIron SX family helps enterprises and service providers reduce costs and gain the operational benefits of a common operating system, a shared interface, and common power supply modules.

FastIron SX 800

  • 8 interface slots
  • Up to 192 Class 3 PoE or PoE+ ports
  • N+1 system/PoE power redundancy
  • Management redundancy
  • Fabric redundancy
  • 1-year 24×7 Free Technical Support
  • Assurance Limited Lifetime Warranty

FastIron SX 1600

  • 16 interface slots
  • Up to 384 Class 3 PoE or PoE+ ports
  • Up to 36 10GbE ports
  • Up to N+3 system/PoE power redundancy
  • Management redundancy
  • Fabric redundancy
  • 1-year 24×7 Free Technical Support
  • Assurance Limited Lifetime Warranty

FastIron SuperX

  • 8 Interface slots
  • Up to 192 Class 3 PoE ports
  • N+1 system power redundancy
  • N+1 PoE power redundancy
  • 1-year Hardware Warranty, 90-day Limited Software Warranty

Brocade FastIron SuperX/SX Family Chassis

Select all desired part numbers and click "Get A Quote".
Part Number Description
FI-SX1-AC FastIron SuperX Chassis with Fan tray and one (1) AC Power Supply. Equivalent to FI-SX1-4-AC.
FI-SX1-DC FastIron SuperX Chassis with Fan tray and one (1) DC Power Supply. Equivalent to FI-SX1-4-DC.
FI-SX800-AC FastIron SX 800 chassis bundle includes one SX 800 8-slot chassis (FI-SX800-S), two Switch Fabric module (SX-FISF), one system power supply (SX-ACPWR-SYS), nine interface panels (SX-FI-IFPNL), three power supply panels (SX-PWR-PNL), and one fan tray (SX-SX800-FAN). This chassis may be configured with IPv4 or IPv6-ready management and line modules.
FI-SX1600-AC FastIron SX 1600 chassis bundle includes one SX 1600 16-slot chassis (FI-SX1600-S), two Switch Fabric Module (SX-FISF), two system power supply (SX-ACPWR-SYS), seventeen interface cover panels (SX-FI-IFPNL), six power supply cover panels (SX-PWR-PNL), one SX 1600 filter (SX-SX1600-FILTER), and two fan trays that includes fans (SX-SX1600-FAN).
FI-SX800-DC FastIron SX 800 chassis bundle includes one SX 800 8-slot chassis (FI-SX800-S), two Switch Fabric module (SX-FISF), one system power supply (SX-DCPWR-SYS), nine interface panels (SX-FI-IFPNL), three power supply panels (SX-PWR-PNL), and one fan tray (SX-SX800-FAN).
FI-SX800-1SF-AC FastIron SX 800 chassis bundle, which includes 1 AC power supply and 1 switch fabric.
FI-SX1600-DC FastIron SX 1600 chassis bundle includes one SX 1600 16-slot chassis (FI-SX1600-S), two Switch Fabric Module (SX-FISF), two system power supply (SX-DCPWR-SYS), seventeen interface cover panels (SX-FI-IFPNL), six power supply cover panels (SX-PWR-PNL), one SX 1600 filter (SX-SX1600-FILTER), and two fan trays that includes fans (SX-SX1600-FAN).
FI-SX1600-1SF-AC FastIron SX 1600 chassis bundle, which includes 2 AC system power supply and 1 switch fabric.

FastIron SX IPv6 I/O Modules

Select all desired part numbers and click "Get A Quote".
Part Number Description
SX-FI12GM-4 FastIron SuperX Management module features 12 combo copper / fiber Gigabit Ethernet ports (10/100/1000 Mbps (RJ45) or Gigabit Ethernet Fiber (SFP) connectivity per port), 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This management module may only be used in systems configured with all IPv4 line modules.
SX-FI12GM-4-PREM FastIron SuperX Management module features 12 combo copper / fiber Gigabit Ethernet ports (10/100/1000 Mbps (RJ45) or Gigabit Ethernet Fiber (SFP) connectivity per port), 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). This management module may only be used in systems configured with all IPv4 line modules.
SX-FIZMR Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port and one serial console port. There are no user traffic ports supported on this module. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This management module may be used in systems configured with all IPv4 line modules or all IPv6-ready line modules.
SX-FIZMR-PREM Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port and one serial console port. There are no user traffic ports supported on this module. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer2, Base Layer3 Services (static routes and RIP advertisement) or Full Layer3 IPv4 Services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). This management module may only be used in systems configured with all IPv4 line modules.
SX-FI2XGMR4 Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port and two 10-Gigabit Ethernet ports for user traffic. The 10-GE ports support pluggable XFP transceivers. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This management module may only be used in systems configured with all IPv4 line modules.
SX-FI2XGMR4-PREM Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port and two 10-Gigabit Ethernet ports for user traffic. The 10-GE ports support pluggable XFP transceivers. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer2, Base Layer3 Services (static routes and RIP advertisement) or Full Layer3 IPv4 Services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). This management module may only be used in systems configured with all IPv4 line modules.
SX-FI8GMR4 8-port GbE IPv4 Management Module for the FastIron SX 800 and SX 1600 chassis. This IPv4 management module includes one Ethernet management port, one serial console port, 4-port GbE copper and 4-port GbE SFP (transceiver not included) for user traffic. Module ships with IronWare Advanced Layer2 and Base Layer3 software. This module may only be used in a system configured with IPv4 management and line modules.
SX-FI8GMR4-PREM 8-port GbE IPv4 Management Module for the FastIron SX 800 and SX 1600 chassis. This IPv4 management module includes one Ethernet management port, one serial console port, 4-port GbE copper and 4-port GbE SFP (transceiver not included) for user traffic. Module ships with Premium IronWare Full L3 IPv4 service set. This module may only be used in a system configured with IPv4 management and line modules.

Brocade FastIron SuperX/SX Family Management Modules (hardware ready for IPv6 routing upgrade) and Full L3 Upgrades

Select all desired part numbers and click "Get A Quote".
Part Number Description
SX-FI12GM-6 FastIron SuperX Management module features 12 combo 10/100/1000 Mbps (RJ45) / SFP Gigabit Ethernet ports, 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This module may be upgraded with Full L3 Ironware Software (IPv4 or IPv4/IPv6). This management module may only be used in systems configured with all IPv6-ready line modules.
SX-FI12GM-6-PREM IPv6-Capable FastIron SuperX Management Module includes 12 combo 10/100/1000 Mbps (RJ45) / SFP Gigabit Ethernet ports (transceivers not included), 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM). This module may be upgraded with Full L3 IPv4 & IPv6 Ironware Software. This management module may only be used in systems configured with all IPv6-ready line modules.
SX-FI8GMR6 8-port GbE Management module with Base L3 IPv4 for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port, 4-port GbE copper and 4-port GbE SFP for user traffic. The GbE ports support pluggable SFP transceivers. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This module may be upgraded with Full L3 Ironware Software (IPv4 or IPv4/IPv6). This management module may only be used in systems configured with all IPv6-ready line modules.
SX-FI8GMR6-PREM IPv6-Capable 8-port GbE Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port, 4- port GbE copper and 4-port GbE SFP for user traffic. The GbE ports support pluggable SFP transceivers. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM). This module may be upgraded with Full L3 IPv4 & IPv6 Ironware Software. This management module may only be used in systems configured with all IPv6-ready line modules.
SX-FI2XGMR6 2-port 10GbE Management module with Base L3 IPv4 for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port and two 10-Gigabit Ethernet (10GbE)ports for user traffic. The 10GbE ports support pluggable XFP transceivers. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This module may be upgraded with Full L3 Ironware Software (IPv4 or IPv4/IPv6). This management module may only be used in systems configured with all IPv6-ready line modules.
SX-FI2XGMR6-PREM IPv6-Capable 2-port 10GbE Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port and two 10-Gigabit Ethernet XFP ports (10GbE) for user traffic. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). This module may be upgraded with Full L3 IPv4 & IPv6 Ironware Software. This management module may only be used in systems configured with all IPv6-ready line modules.
SX-FI12GM-6-PREM6 IPv6-Capable FastIron SuperX Management Module includes 12 combo 10/100/1000 Mbps (RJ45) / SFP Gigabit Ethernet ports (transceivers not included), 400 MHz processor and 256 MB SDRAM. Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets (BGP-4, OSPF/OSPFv3, RIP/RIPng, VRRP/VRRPE, DVMRP, PIM, IPv4/IPv6 static routes, 6-to-4 static tunneling). The module can only be used in a system configured with all IPv6-ready modules.
SX-FIZMR-6-PREM6 IPv6-Capable Zero-Port Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes 1 Ethernet management port and 1 serial console port. There are no user traffic ports supported on this module. To configure redundancy, two of the same type of management modules must be installed in the chassis. Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets (BGP-4, OSPF/OSPFv3, RIP/RIPng, VRRP/VRRPE, DVMRP, PIM, IPv4/IPv6 static routes, 6-to-4 static tunneling). The module can only be used in systems configured with all IPv6-ready line modules.
SX-FI8GMR6-PREM6 IPv6-Capable 8 port GbE Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port, 4- port GbE copper and 4-port GbE SFP (transceiver not included) for user traffic. Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets. The module can only be used in a system configured with all IPv6-ready line modules.
SX-FI2XGMR6-PREM6 IPv6-Capable 2-port 10GbE Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes 1 Ethernet management port, one serial console port and 2 10GbE ports for user traffic. The 10GbE ports support pluggable XFP transceivers (transceivers not included). Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets (BGP-4, OSPF/OSPFv3, RIP/RIPng, VRRP/VRRPE, DVMRP, PIM, IPv4/IPv6 static routes, 6-to-4 static tunneling). The module can only be used in a system configured with all IPv6-ready line modules.
SX-FIZMR-6-PREM IPv6-Capable Zero-Port Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes 1 Ethernet management port and 1 serial console port. There are no user traffic ports supported on this module. To configure redundancy, two of the same type of management modules must be installed in the chassis. Module ships with Premium IronWare software including Full L3 IPv4 service set (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM) and can be upgraded with Full L3 IPv4 & IPv6 Ironware Software. The module can only be used in systems configured with all IPv6-ready line modules.

Brocade FastIron SuperX/SX Family Line Modules (IPv4) and POE Upgrade Module

Select all desired part numbers and click "Get A Quote".
Part Number Description
SX-FI424100FX 24-port 100FX bundle, which includes SX-FI424HF and 24 E1MG-100FX optics for fiber to the desktop applications.
SX-FI42XG-BNDL-2CX4 2-port CX4 FastIron SuperX module bundle. Includes one SX-FI2XG and two 10G-XFP-CX4.
SX-FI424C 24-port 10/100/1000 Mbps (RJ-45) Ethernet module for FastIron SuperX family
SX-FI424P 24-port 10/100/1000 Mbps (RJ-45) Ethernet with POE installed module for FastIron SuperX family
SX-FI424F 24-port SFP-based Gigabit Fiber Ethernet module for FastIron SuperX family
SX-FI424HF 24-port 100/1000 Mbps SFP-based Fiber Ethernet module for FastIron SuperX family
SX-FI42XG 2-port XFP 10 Gigabit Ethernet module for FastIron SuperX family
SX-24GCPOE POE Add-in Card for 24-port 10/100/1000 Mbps (RJ-45) modules

Brocade FastIron SuperX/SX Family Line Modules (hardware ready for IPv6 upgrade option) and POE Upgrade Module

Select all desired part numbers and click "Get A Quote".
Part Number Description
SX-FI624C 24-port 10/100/1000 Mbps Gigabit Ethernet module for FastIron SuperX family.
SX-FI624P 24-port 10/100/1000 Mbps Gigabit Ethernet with POE installed IPv6 module for FastIron SuperX family.
SX-FI624HF 24-port 100/1000 SFP based Fiber Ethernet IPv6 module for FastIron SuperX family.
SX-FI62XG 2-port XFP 10 Gigabit Ethernet module for FastIron SuperX family.
SX-FI624100FX 24-port 100FX bundle, which includes SX-FI624HF and 24 E1MG-100FX optics for fiber to the desktop applications.
SX-24GCPOE POE Add-in Card for 24-port 10/100/1000 modules

Brocade FastIron SuperX/SX Family Options and Accessories

Select all desired part numbers and click "Get A Quote".
Part Number Description
SX-FIL3U-SW L3 SW LIC UPGRADE FOR V4 MGMT MODULES
SX-FIL3U-6-IPV4-SW IPV4 SW LIC UPGRADE FOR V6 MGMT MODULES
SX-FIL3U-6-IPV6-SW IPV4 + IPV6 SW LIC UPGRADE FOR V6 MGMT MODULES
SX-FIL3U Full Layer 3 IPv4 Upgrade Kit for the FastIron SuperX/SX family. Software includes advanced Layer 2 and full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM).
SX-FIL3U-6-IPV4 Full Layer 3 IPv4 Upgrade Kit for the IPv6-ready management modules for the FastIron SuperX/SX family. Software includes advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). ote: This upgrade kit may only be applied to IPv6-ready management modules and does not enable IPv6 routing.
SX-FIL3U-6-IPV6 Full Layer 3 IPv4+IPv6 upgrade kit for the IPv6-ready management modules for the FastIron SuperX/SX family. This software upgrade adds support for Full Layer 3 IPv6 routing protocols including RIPng, OSPFv3, IPv6 static routes, 6-to-4 static tunneling. This upgrade also includes Full L3 IPv4 services including RIPv1/v2, OSPF, BGP4, PIM-SM, PIM-DM, and DVMRP. Note: This upgrade kit may only be applied to IPv6-ready management modules.
10G-XFP-CX4 10GBASE-CX4, XFP module,15m, CX4 connector
10G-XFP-SR 850nm serial pluggable XFP optic (LC), target range 300m over MMF
10G-XFP-LR 1310nm serial pluggable XFP optic (LC) for up to 10km over SMF
10G-XFP-ER 1550nm serial pluggable XFP optic (LC) for up to 40km over SMF
10G-XFP-ZR 1550nm serial pluggable XFP optic (LC) for up to 80km over SMF
10G-XFP-ZRD-1530-33 10GBASE-ZR DWDM, XFP optic, 80km, 1530.33 nm, Channel 59, LC connector
10G-XFP-ZRD-1531-12 10GBASE-ZR DWDM, XFP optic, 80km, 1531.12 nm, Channel 58, LC connector
10G-XFP-ZRD-1531-90 10GBASE-ZR DWDM, XFP optic, 80km, 1531.90 nm, Channel 57, LC connector
10G-XFP-ZRD-1532-68 10GBASE-ZR DWDM, XFP optic, 80km, 1532.68 nm, Channel 56, LC connector
10G-XFP-ZRD-1533-47 10GBASE-ZR DWDM, XFP optic, 80km, 1533.47 nm, Channel 55, LC connector
10G-XFP-ZRD-1534-25 10GBASE-ZR DWDM, XFP optic, 80km, 1534.25 nm, Channel 54, LC connector
10G-XFP-ZRD-1535-04 10GBASE-ZR DWDM, XFP optic, 80km, 1535.04 nm, Channel 53, LC connector
10G-XFP-ZRD-1535-82 10GBASE-ZR DWDM, XFP optic, 80km, 1535.82 nm, Channel 52, LC connector
10G-XFP-ZRD-1536-61 10GBASE-ZR DWDM, XFP optic, 80km, 1536.61 nm, Channel 51, LC connector
10G-XFP-ZRD-1537-40 10GBASE-ZR DWDM, XFP optic, 80km, 1537.40 nm, Channel 50, LC connector
10G-XFP-ZRD-1538-19 10GBASE-ZR DWDM, XFP optic, 80km, 1538.19 nm, Channel 49, LC connector
10G-XFP-ZRD-1538-98 10GBASE-ZR DWDM, XFP optic, 80km, 1538.98 nm, Channel 48, LC connector
10G-XFP-ZRD-1539-77 10GBASE-ZR DWDM, XFP optic, 80km, 1539.77 nm, Channel 47, LC connector
10G-XFP-ZRD-1540-56 10GBASE-ZR DWDM, XFP optic, 80km, 1540.56 nm, Channel 46, LC connector
10G-XFP-ZRD-1541-35 10GBASE-ZR DWDM, XFP optic, 80km, 1541.35 nm, Channel 45, LC connector
10G-XFP-ZRD-1542-14 10GBASE-ZR DWDM, XFP optic, 80km, 1542.14 nm, Channel 44, LC connector
10G-XFP-ZRD-1542-94 10GBASE-ZR DWDM, XFP optic, 80km, 1542.94 nm, Channel 43, LC connector
10G-XFP-ZRD-1543-73 10GBASE-ZR DWDM, XFP optic, 80km, 1543.73 nm, Channel 42, LC connector
10G-XFP-ZRD-1544-53 10GBASE-ZR DWDM, XFP optic, 80km, 1544.53 nm, Channel 41, LC connector
10G-XFP-ZRD-1545-32 10GBASE-ZR DWDM, XFP optic, 80km, 1545.32 nm, Channel 40, LC connector
10G-XFP-ZRD-1546-12 10GBASE-ZR DWDM, XFP optic, 80km, 1546.12 nm, Channel 39, LC connector
10G-XFP-ZRD-1546-92 10GBASE-ZR DWDM, XFP optic, 80km, 1546.92 nm, Channel 38, LC connector
10G-XFP-ZRD-1547-72 10GBASE-ZR DWDM, XFP optic, 80km, 1547.72 nm, Channel 37, LC connector
10G-XFP-ZRD-1548-51 10GBASE-ZR DWDM, XFP optic, 80km, 1548.51 nm, Channel 36, LC connector
10G-XFP-ZRD-1549-32 10GBASE-ZR DWDM, XFP optic, 80km, 1549.32 nm, Channel 35, LC connector
10G-XFP-ZRD-1550-12 10GBASE-ZR DWDM, XFP optic, 80km, 1550.12 nm, Channel 34, LC connector
10G-XFP-ZRD-1550-92 10GBASE-ZR DWDM, XFP optic, 80km, 1550.92 nm, Channel 33, LC connector
10G-XFP-ZRD-1551-72 10GBASE-ZR DWDM, XFP optic, 80km, 1551.72 nm, Channel 32, LC connector
10G-XFP-ZRD-1552-52 10GBASE-ZR DWDM, XFP optic, 80km, 1552.52 nm, Channel 31, LC connector
10G-XFP-ZRD-1553-33 10GBASE-ZR DWDM, XFP optic, 80km, 1553.33 nm, Channel 30, LC connector
10G-XFP-ZRD-1554-13 10GBASE-ZR DWDM, XFP optic, 80km, 1554.13 nm, Channel 29, LC connector
10G-XFP-ZRD-1554-94 10GBASE-ZR DWDM, XFP optic, 80km, 1554.94 nm, Channel 28, LC connector
10G-XFP-ZRD-1555-75 10GBASE-ZR DWDM, XFP optic, 80km, 1555.75 nm, Channel 27, LC connector
10G-XFP-ZRD-1556-55 10GBASE-ZR DWDM, XFP optic, 80km, 1556.55 nm, Channel 26, LC connector
10G-XFP-ZRD-1557-36 10GBASE-ZR DWDM, XFP optic, 80km, 1557.36 nm, Channel 25, LC connector
10G-XFP-ZRD-1558-17 10GBASE-ZR DWDM, XFP optic, 80km, 1558.17 nm, Channel 24, LC connector
10G-XFP-ZRD-1558-98 10GBASE-ZR DWDM, XFP optic, 80km, 1558.98 nm, Channel 23, LC connector
10G-XFP-ZRD-1559-79 10GBASE-ZR DWDM, XFP optic, 80km, 1559.79 nm, Channel 22, LC connector
10G-XFP-ZRD-1560-61 10GBASE-ZR DWDM, XFP optic, 80km, 1560.61 nm, Channel 21, LC connector
10G-XFP-ZRD-1561-42 10GBASE-ZR DWDM, XFP optic, 80km, 1561.42 nm, Channel 20, LC connector
E1MG-PATCHCORD-20U CABLE, FIBER, MODE CONDITIONING, 20U OFFSET. To be used in combination with the E1MG-LX for operation over FDDI-grade multimode fiber (62.5 micron core) to distances of 2 km.
E1MG-SX-OM 1000Base-SX SFP optic, MMF, LC connector, Optical Monitoring Capable
E1MG-SX-OM-8 1000Base-SX SFP optic 8 Pack, MMF, LC connector, Optical Monitoring Capable
E1MG-LX-OM 1000Base-LX SFP optic, SMF, LC connector, Optical Monitoring Capable
E1MG-LX-OM-8 1000Base-LX SFP optic 8 Pack, SMF, LC connector, Optical Monitoring Capable
E1MG-TX 1000BASE-TX SFP Copper, RJ-45 Connector
E1MG-LHB 1000Base-LHB SFP optic, SMF, LC connector, 150km Maximum reach
E1MG-CWDM80-1470 CWDM SFP optic, 80Km, 1470nm, LC connector
E1MG-CWDM80-1490 CWDM SFP optic, 80Km, 1490nm, LC connector
E1MG-CWDM80-1510 CWDM SFP optic, 80Km, 1510nm, LC connector
E1MG-CWDM80-1530 CWDM SFP optic, 80Km, 1530nm, LC connector
E1MG-CWDM80-1550 CWDM SFP optic, 80Km, 1550nm, LC connector
E1MG-CWDM80-1570 CWDM SFP optic, 80Km, 1570nm, LC connector
E1MG-CWDM80-1590 CWDM SFP optic, 80Km, 1590nm, LC connector
E1MG-CWDM80-1610 CWDM SFP optic, 80Km, 1610nm, LC connector
E1MG-BXU 1000Base-BXU SFP optic SMF, transmits at 1310nm and receives at 1490nm, LC connector,single strand SMF fiber. This optic should only be connected to an E1MG-BXD at the far end.
E1MG-BXD 1000Base-BXD SFP optic SMF, transmits at 1490nm and receives at 1310nm, LC connector,single strand SMF fiber. This optic should only be connected to an E1MG-BXU at the far end.
SX-FI-CHS FastIron SuperX 8-slot Chassis only
FI-SX800-S FastIron SX 800 spare chassis.
FI-SX1600-S FastIron SX 1600 spare chassis.
SX-FI-IFPNL FI SuperX/SX module blank panel (interface module slots for FI SuperX and all module slots for FI SX 800/1600)
SX-PWR-PNL FI SuperX/SX power supply blank panel
SX-FI-FAN FastIron SuperX Fan Tray and Assembly
SX-SX800-FAN FI SX 800 Fan and Fan tray
SX-SX1600-FAN FI SX 1600 Fan and Fan Tray
SX-SX1600-FILTER FI SX 1600 Filter
SX-FISF Switch Fabric Module for the FastIron SX 800 and the FastIron SX 1600. Two are required to ensure high performance and high availability.

Brocade FastIron SuperX/SX Family Power Supply

Select all desired part numbers and click "Get A Quote".
Part Number Description
SX-ACPWR-SYS 90-240 VAC power supply for the FastIron SuperX family
SX-DCPWR-SYS DC Power Supply for the FastIron SuperX family
SX-ACPWR-POE 90-240 VAC power supply for the FastIron SuperX family
SX-DCPWR-POE DC POE power supply for the FastIron SuperX family
SX-ACPWR2500-POE FSX 2500W 220V POE PS for the FastIron SuperX family
SX-PCAUS Australian Power Cord for the FastIron SuperX family
00700-551 Right Angle Power Cord, 10A 125V, NEMA 5-15P (plug) to IEC 60320-C13 Connector.
SX-GNDLUG-KIT Super X series chassis grounding kit includes: 1x Grounding lug,2 x #1032 thread size screw,2 x flat washer,2 x #10 external lock washer

Warranty:

5-Year Brocade/Foundry Warranty
As the world’s largest reseller of refurbished Brocade hardware, we offer an extended 5-Year warranty to end-users for every piece of gear we deliver. This warranty includes advance replacement, which means when you call us to report a problem, our technical team will work with you quickly to assess the problem. If we cannot overcome it, we ship a replacement unit immediately. Your sales rep will then provide an email to you with RMA instructions for returning the faulty unit.

*In the event we cannot supply a replacement unit, we will provide a refund or credit once faulty unit is returned.

Return Policy
The defective product must be received by Townsend Networks within 30 calendar days from the date the RMA is issued. A defective product received by Townsend Networks more than 30 calendar days from the date the RMA is issued will not be accepted by Townsend Networks and will not be eligible for repair, replacement or credit.

Hours: Monday to Friday, 9am – 5pm, Pacific Standard.
We accept the following payment methods:

Accepted Payment Methods