866-IT-ASSET | Email

 

Juniper M160 Systems

 

Juniper M160

Used Juniper M160 Base Systems

Select all desired part numbers and click "Get A Quote".
Part Number Description
M160BASE-DC M160 Base Unit: 8-slot chassis with cooling system, Backplane, 4 SFMs (with Internet Processor II), 1 Routing Engine with 768-MB DRAM, 80-MB flash drive and 6.4-GB hard disk drive and MCS, 2 DC Power Entry Modules

Used Juniper Networks : Used Juniper M160 Redundant Routing Option

Select all desired part numbers and click "Get A Quote".
Part Number Description
RE-333-768 333 MHz RE board (333 MHz Pentium II, 768 MB DRAM, 80 MB flash drive, 6.4 GB hard disk drive)
M160-FPC1-E M160 Enhanced Flexible PIC Concentator(requires 4.4R2 or later SW)
M160-FPC2 M160 High-Bandwidth Flexible PIC Concentrator
M160-FPC2-E M160 Enhanced High-bandwidth Flexible PIC Concentator (requires 4.4R2 or later SW)
PB-1CHOC12DS3-SMIR 1-Port Channelized OC-12 to DS-3 PIC, SM, IR (for M160-FPC1)
PB-1CHSTM1-SMIR 1-port Channelized STM1-E1 PIC for M160
PB-1GE-LH 1-port Gigabit Ethernet PIC for M160-FPC1, Long-haul optics
PB-1GE-LX-B 1-port Gigabit Ethernet PIC, LX Optics (for M160-FPC1; supports CCC-for-VLANs)
PB-1GE-SX-B 1-port Gigabit Ethernet PIC, SX Optics (for M160-FPC1; supports CCC-for-VLANs)
PB-1OC12-ATM-MM 1-port ATM OC-12/STM4 PIC, Multimode (for M160-FPC1)
PB-1OC12-ATM-SMIRR 1-port ATM OC-12/STM4 PIC, SM IR (for M160-FPC1)
PB-1OC12-SON-MM 1-port SONET/SDH OC-12/STM4 PIC, Multimode (for M160-FPC1)
PB-1OC12-SON-SMIR 1-port SONET/SDH OC-12/STM4 PIC, SM, IR (for M160-FPC1)
PB-2GE-LX 2-port Gigabit Ethernet PIC, LX Optics (for M160-FPC2)
PB-2GE-SX 2-port Gigabit Ethernet PIC, SX Optics (for M160-FPC2)
PB-2OC3-ATM-MM 2-port ATM OC-3/STM1 PIC, Multimode (for M160-FPC1)
PB-2OC3-ATM-SMIR 1-port Channelized STM1-E1 PIC for M10, M5
PB-48FE-TX 48-port 10/100 TX Ethernet PIC. Includes (4) 3-meter RJ21 cables (CBL-RJ21-MDI-S) with MDI pinout for use with RJ45 patch panel (for M160-FPC2)
PB-4CHDS3 4-port Channelized DS3 PIC (ships with cables) (for M160-FPC1)
PB-4DS3 4-port DS-3 PIC (with cables) (for M160 FPC1)
PB-4DS3-ATM 4-port ATM DS3 PIC for M160 (ships with cable)
PB-4E1-COAX 4-port E1 PIC (75-ohm BNC connectors) (ships with cables) (for M160-FPC1)
PB-4E1-RJ48 4-port E1 PIC (120-ohm RJ48 connectors) (for M160-FPC1)
PB-4E3 4-port E3 PIC (with cables) (for M160 FPC1)
PB-4E3-ATM 4-port ATM E3 PIC for M160 (ships with cable)
PB-4FE-TX 4-port Fast Ethernet PIC, TX interface, RJ45 connector (for M160-FPC1)
PB-4GE-SX 4-port Gigabit Ethernet PIC, SX Optics (for M160-FPC2)
PB-4OC12-SON-MM 4 port SONET/SDH OC12/STM4 PIC, Multi-Mode (for M160-FPC2)
PB-4OC12-SON-SMIR 4 port SONET/SDH OC12/STM4 PIC, SM, IR (for M160-FPC2)
PB-4OC3-SON-MM 4-port SONET/SDH OC-3/STM1 PIC, Multimode (for M160-FPC1)
PB-4OC3-SON-SMIR 4-port SONET/SDH OC-3/STM1 PIC, SM, IR (for M160-FPC1)
PB-4T1-RJ48 4-port T1 PIC, (120-ohm, RJ48 connectors) (for M160-FPC1)
PB-OC48-SON-SMSR 1-port SONET/SDH OC-48/STM16 PIC, SM SR (for M160-FPC2)
PB-TUNNEL Tunnel Services PIC (for M160-FPC2)
IB-OC192-SON-LR-E 1-port SONET/SDH OC-192/STM 64 Interface (PIC plus Enhanced FPC), LR optics (requires 4.4R2 or later SW).
IB-OC192-SON-SR2-B 1-port SONET/SDH OC-192/STM 64 Interface (PIC plus FPC), SR2 optics (revision B).
IB-OC192-SON-SR2-E 1-port SONET/SDH OC-192/STM 64 Interface (PIC plus Enhanced FPC), SR2 optics (requires 4.4R2 or later SW).
M160-FPC1 M160 Flexible PIC Concentrator

Warranty:

1-Year Juniper Warranty
As the world’s largest reseller of used Juniper hardware, we offer an extended 1-Year warranty to end-users for every piece of gear we deliver. This Townsend Networks warranty includes advance replacement, which means when you call us to report a problem, our technical team will work with you quickly to assess the problem. If we cannot overcome it, we ship a replacement unit immediately. Your sales rep will then provide an email to you with RMA instructions for returning the faulty unit.

*In the event we cannot supply a replacement unit, we will provide a refund or credit once faulty unit is returned.

Return Policy
The defective product must be received by Townsend Networks within 30 calendar days from the date the RMA is issued. A defective product received by Townsend Networks more than 30 calendar days from the date the RMA is issued will not be accepted by Townsend Networks and will not be eligible for repair, replacement or credit.

Hours: Monday to Friday, 9am – 5pm, Pacific Standard.
We accept the following payment methods:

Accepted Payment Methods