Juniper's ACX5448 is a family of metro routers that Juniper's hardware guide calls Universal Metro Routers: the ACX5448, the ACX5448-D and the ACX5448-M. They share one chassis height and width and one control plane, and differ in the ports: dense 10GbE with 100GbE uplinks on the ACX5448, 200GbE CFP2-DCO ports on the ACX5448-D, and MACsec on the ACX5448-M. This guide sets the three side by side from Juniper's ACX5448, ACX5448-D, and ACX5448-M hardware guide, with the power supplies each one takes.
The short answer
The ACX5448 has forty-eight ports at 10GbE or 1GbE and four ports at 100GbE. The ACX5448-D trades some of those for two 200-Gigabit ports that take CFP2-DCO optics. The ACX5448-M has forty-four 10GbE ports and six 100GbE ports, and adds MACsec on the forty-four 10GbE ports.
The three models side by side
| Model | 10GbE or 1GbE ports | 100GbE QSFP28 ports | Other ports | Weight with FRUs |
|---|---|---|---|---|
| ACX5448 | Forty-eight (ports 0 to 47) | Four (ports 48 to 51) | None | 22.48 lb (10.2 kg) |
| ACX5448-D | Thirty-six (ports 0 to 35) | Two (ports 36 and 37) | Two 200GbE CFP2-DCO (ports 38 and 39) | 23.14 lb (10.5 kg) |
| ACX5448-M | Forty-four (ports 0 to 43), with MACsec | Six (ports 44 to 49) | None | 26.12 lb (11.85 kg) |
The SFP+ ports run at 10 Gbps with SFP+ optics and at 1 Gbps with SFP optics. The QSFP28 ports can be split into four 25 Gbps interfaces with breakout cables, and also run at 40 Gbps with QSFP+ optics. The ACX5448 and ACX5448-D are 1.70 in. high, 17.26 in. wide and 20.29 in. deep without the fan and power supply handles. The ACX5448-M is deeper, at 24.0 in. without handles, so check the rack depth before you swap one in for an ACX5448.
The QSFP28 ports also run at 40 Gbps with QSFP+ optics.
The ACX5448-D and its multiplexed ports
On the ACX5448-D, one QSFP28 port, port 36, and one CFP2-DCO port, port 38, work as a multiplexed pair. Out of the box the interface on port 36 is not created; it is enabled with the set chassis fpc 0 cfp-to-et command, and doing so deletes the interface et-0/2/1 on port 38. So decide which of the two a design needs before cabling the router. The other QSFP28 port, 37, and the second CFP2-DCO port, 39, are always available.
Control plane, cooling and power supplies
All three models share the control plane: a 1.9 GHz six-core Intel CPU with 32 GB of memory and two 100 GB enterprise-grade SSDs. Juniper ships them with redundant fans and redundant power supply modules, in six fan slots and two power supply slots at the rear. Each model comes with front-to-back airflow, airflow out or AFO, or back-to-front airflow, airflow in or AFI, and with AC or DC supplies. So the ACX5448-AC-AFO is the AC model with front-to-back airflow, and the ACX5448-D-AC-AFI is the AC ACX5448-D with back-to-front airflow.
The power supplies differ by model: the ACX5448 takes 650 W supplies, such as the JPSU-650W-AC-AO for AC with airflow out and the JPSU-650W-DC-AFO for DC, while the ACX5448-D and ACX5448-M take 850 W supplies such as the JPSU-850W-AC-AFI. A spare supply has to match both the model and the airflow of the router it goes into. The fans follow the same rule: the ACX5448-FAN-AFO and ACX5448-D-FAN-AFO are the airflow out fan modules, and Juniper says to install power supplies labeled AIR OUT only in routers whose fan modules are labeled AIR OUT, and AIR IN with AIR IN. An ACX5448 fan module weighs 0.35 lb and an AC power supply 2.2 lb, so spares are light to ship and to keep on a shelf. The AC cords use a C13 coupler to IEC standard 60320.
| Model (AC power) | Typical power consumption | Maximum power consumption |
|---|---|---|
| ACX5448 | 250 W | 450 W |
| ACX5448-D | 340 W | 550 W |
| ACX5448-M | 300 W | 550 W |
Before removing or installing components, attach an ESD strap to an ESD point and wrap and fasten the other end around your bare wrist.
What to check before you buy
- The model letter: the ACX5448-D is the one with CFP2-DCO ports, and the ACX5448-M the one with MACsec.
- The airflow suffix against the rack: AFO for front-to-back, AFI for back-to-front, and the power supplies and fans to match.
- The power supply wattage against the model: 650 W for the ACX5448, 850 W for the ACX5448-D and ACX5448-M.
- The optics: QSFP28 for 100GbE, QSFP+ for 40GbE, SFP+ or SFP for the access ports, and CFP2-DCO for the ACX5448-D's 200GbE ports.
In stock at Townsend
In stock now: the ACX5448-AC-AFO, the ACX5448-D-AC-AFI, and the matching ACX5448 supplies, the JPSU-650W-AC-AO and the JPSU-650W-DC-AFO.
Where to look
The ACX5448 page lists every ACX5448 in stock, Juniper power supplies the JPSU supplies, and Juniper transceivers the optics. For the smaller and newer ACX routers, read Juniper's ACX metro routers compared. Request a quote for a configuration that is not listed, or sell the routers you retire.




