Skip to content
Townsend Networks
Build guidePublished

Small data center leaf-spine build: 25G leaves, 100G spines

Models covered: QFX5120-48Y, QFX5200-32C

The maker's warnings

  • On the QFX5120-48Y the SFP28 ports are grouped in quads and the speed can be set only per quad; the ports run at 10 Gbps by default.[S2]

In a leaf-spine fabric, servers connect to leaf switches at the top of each rack, and every leaf connects to every spine. Any server is then the same number of hops from any other, and adding a rack means adding a leaf. Arista's 7050X3 data sheet puts the demand plainly: virtualization and containers are "accelerating the need for dense 25 and 100G Ethernet switching in both the leaf and spine tiers of modern networks." This guide builds a small fabric from the Arista and Juniper switches we sell, using the makers' own figures.

Leaf switches: 25G down, 100G up

The leaves here have 25G ports for servers and 100G ports for uplinks. Two we carry:

LeafServer portsUplink portsThroughput
Arista 7050SX3-48YC848 ports of 25G SFP8 ports of 100G QSFP1004 Tbps
Juniper QFX5120-48YSFP28 at 25, 10 or 1 Gbps8 QSFP28 ports4 Tbps

Arista describes the 7050SX3-48YC8 as a "1RU system" whose QSFP ports "allow for 100GbE or 40GbE as high speed network uplinks", and the series as "suited for both top of rack leaf, or fixed configuration spines." Juniper's QFX5120 system overview says the family offers "25-Gbps and 100-Gbps wire speeds", and lists the QFX5120-48Y with "4 Tbps" of aggregate throughput and "8 QSFP28 ports ( 48 through 55 )".

One detail matters when servers run at mixed speeds. On the QFX5120-48Y, "The SFP28 ports are grouped in quads (groups of four) and you can configure the speed of the ports only in quads", and "The ports are configured to operate at 10-Gbps speed by default." Group your 10G and 25G servers by quad when you cable the rack. On the Arista side, the 7050SX3-48YC8's "high density SFP ports can be configured to run either at 25G or a mix of 10G/1G speeds."

Juniper's guide says QFX5120 switches offer 25-Gbps and 100-Gbps wire speeds, and the SFP28 ports can operate at 25-Gbps, 10-Gbps, or 1-Gbps speed. Its table lists the QFX5120-48Y with a 2.2-GHz quad-core Intel CPU, 16 GB of memory and 50 GB of SSD storage.

Spine switches: 100G across

The spine only needs fast ports, and plenty of them:

SpinePortsNotes from the maker
Arista 7050CX3-32S32x 100G QSFP100 ports, 2 SFP+ ports"ideal for both high performance leaf or collapsed spine tiers"
Juniper QFX5200-32C32 QSFP28 sockets"configured as 100-Gigabit Ethernet ports by default"

Juniper's QFX5200 overview adds that the ports "can also be configured to speeds of 50, 40, 25, or 10-Gigabit Ethernet", and that the QFX5200-32C is a "compact 1 U standalone" switch. Arista says each 7050CX3 QSFP port "supports a choice of 5 speeds with flexible configuration between 100GbE, 40GbE, 4x10GbE, 4x25GbE or 2x50GbE modes".

Sizing the fabric

Three numbers from the tables set the size, and the arithmetic is yours to do with your own counts:

  • Spines per leaf. A leaf with 8 uplink ports can reach up to 8 spines with one link each, or fewer spines with more links each. Two spines is the smallest layout that keeps the fabric up while one spine is down.
  • Leaves per spine. A spine with 32 ports of 100G takes up to 32 leaf links. That is the ceiling on leaves for a fabric with one link from each leaf to each spine.
  • Oversubscription. On each leaf, add up the speeds of the server ports you will use and compare that with the sum of the uplink speeds. If the server side adds up to more than the uplinks, the uplinks can congest when every server is busy.

Equal-cost routing is what spreads traffic across the spines. Arista lists "128-way Equal Cost Multipath Routing (ECMP)" for the 7050X3 series.

Running a network on top: EVPN-VXLAN

Most fabrics carry a layer 2 overlay for the servers that need it. Both makers support it: Arista lists "EVPN/VXLAN Routing and Bridging" for the 7050X3, and Juniper says "QFX5120 Switches support IP fabrics with EVPN-VXLAN overlays, enabling Layer 2/3 network virtualization." Running one maker per fabric keeps the overlay configuration in one form.

Airflow and power

Match airflow to the rack before you order. Arista sells the 7050X3 "with airflow choices for back to front, or front to back", and Juniper says the QFX5120 switches "support two 650-W AC or DC power supplies with front-to-back or back-to-front airflow". The airflow version is part of the part number, which we explain in our airflow suffix guide. Juniper also notes that the QFX5120 "fan modules are hot-removable and hot-insertable field-replaceable units (FRUs)".

In stock at Townsend

For leaves we have the Arista 7050SX3-48YC8 and the Juniper QFX5120-48Y in stock; for spines, the Arista 7050CX3-32S and the Juniper QFX5200-32C. The shelves: Arista 7050X3, QFX5120 and QFX5200.

When you ask for a quote, send the rack count and server port speeds per rack, and we will size the leaves and spines to match.

Sources

Checked against the maker's documents on .

  1. S17050X3 Series 10/25/40/50/100G Data Center Switches Data SheetArista Networks · Document: 03-0040-46 · Revision: Sept 4, 2026 · Section: Product Highlights; Model Overview; Layer 3 Features; Virtualization Support · September 4, 2026

  2. S2QFX5120 System OverviewJuniper Networks · Document: QFX5120 Switch Hardware Guide · Revision: as read 2026-11-04 · Section: Benefits; Table 1; QFX5120-48Y front panel; Virtual Chassis (Table 3); Cooling System; Power System · November 4, 2026

  3. S3QFX5200 System OverviewJuniper Networks · Document: QFX5200 Switch Hardware Guide · Revision: as read 2026-11-04 · Section: QFX5200-32C and QFX5200-32C-L Hardware · November 4, 2026

In stock now

DCS-7050SX3-48YC8-R Arista Switch, Back-to-Front, Used, 48x 1/10/25GbE SFP28 and 8x 100GbE QSFP28

DCS-7050SX3-48YC8-R

DCS-7050SX3-48YC8-R Arista Switch, Back-to-Front, Used, 48x 1/10/25GbE SFP28 and 8x 100GbE QSFP28

In stock

$7,065Ships same day
QFX5120-48Y-AFO Juniper Switch, Front-to-Back, 48x 1/10/25GbE SFP28 and 8x 100GbE QSFP28

QFX5120-48Y-AFO

QFX5120-48Y-AFO Juniper Switch, Front-to-Back, 48x 1/10/25GbE SFP28 and 8x 100GbE QSFP28

In stock

$9,895Ships same day
DCS-7050CX3-32S-F Arista Switch, Front-to-Back, Refurbished, 32x 100GbE QSFP28 and 2x 10GbE SFP+

DCS-7050CX3-32S-F

DCS-7050CX3-32S-F Arista Switch, Front-to-Back, Refurbished, 32x 100GbE QSFP28 and 2x 10GbE SFP+

In stock

$4,995Ships same day
QFX5200-32C-AFO Juniper Switch, Front-to-Back, Refurbished, 32x 100GbE QSFP28

QFX5200-32C-AFO

QFX5200-32C-AFO Juniper Switch, Front-to-Back, Refurbished, 32x 100GbE QSFP28

In stock

$1,295Ships same day

Need help planning your next move?

Tested, warrantied hardware with real availability, and cash offers for decommissioned gear. Quotes answered by a human.