Skip to content
Townsend Networks
Townsend Networks
Arista

Arista R4 launch: what it means for 7280R3 owners

Equipo de Townsend Networks

Ingeniería de hardware y mesa de compras

On November 17, 2026, Arista announced new R4 platforms under its Etherlink name. Arista aims them at distributed inferencing: answering AI requests from compute that sits closer to the people sending them, instead of from one central cluster far away. The lineup has four parts: the 7020HR4 and 7020R4 compact routing platforms, the 7282R4 with dual Supervisor Engines, the 7280R4 coherent transport platform with ZR/ZR+ optics, and a pluggable optical line system. If you run Arista 7280R3 or 7050X3 switches today, or you are planning a refresh, this post sets out what was announced, what the new data sheets say, and how to decide between moving to R4 and keeping or adding to what you already run.

What Arista announced on November 17, 2026

The headline is a new generation of routing silicon. Arista says the R4 platforms are built on advanced 5nm silicon, and it claims up to 60% lower power consumption than alternate platforms based on 7nm or even 16nm chips. That is a comparison against other platforms on older chips, not a measured figure for your rack, so treat it as a direction rather than a number to plan a power budget on.

Arista lists four products:

  • 7020HR4 and 7020R4: compact routing platforms for secure compute and storage aggregation in front-end networks, with integrated MACsec and IPsec encryption, SRv6 in silicon, accurate network timing and multi-core CPUs for fast route updates.
  • 7282R4: a system with dual Supervisor Engines, so the control plane is redundant. Arista pitches it for single-homed endpoints and IP peering points, where one box has to stay up on its own.
  • 7280R4 coherent transport: ZR/ZR+ coherent pluggable optics at 400 Gbps and/or 800 Gbps speeds, with integrated MACsec encryption.
  • Pluggable optical line system: a 25.6 Tbps optical amplifier covering the full C-band, with muxes and demuxes for ZR/ZR+ aggregation and a pluggable OTDR for testing fiber while it carries traffic.

On timing, Arista says the products are available now, except the 7020HR4, which will be available in early 2027. Arista also describes multi-tenant VPN services over segment routing, and temperature hardening with network timing for compute deployed in outside plants close to 5G and AI-RAN cell towers. Most enterprise owners will not need that last part, but it explains why the hardened 7020HR4 exists at all.

The 7280R4 and 7282R4 in numbers

Arista calls the 7280R4 Series its 7th generation of full-feature, deep-buffered fixed systems. The data sheet gives up to 25.6 Tbps (51.2 Tbps Full Duplex) of line-rate throughput, with up to 32 ports of 800GbE. Each model comes at two levels: R4 models tuned for data center workloads, and R4K models tuned for large scale routing.

The models on the data sheet:

ModelPortsThroughput and buffer
7280R4-32PE and 7280R4-32DE32 port 800G OSFP or QSFP-DD, plus 8 x 25G SFP and 2 x QSFP-LS ports25.6 Tbps with 32GB buffer
7280R4-64QC-10PE64 port 100G QSFP and 10 port 800G OSFP14.4 Tbps with 16GB buffer
7280R4-32QF-32DF32 port 400G QSFP and 32 port 400G QSFP-DD, up to 16 x 800G QSFP-DD25.6 Tbps with 32GB buffer
7282R4-64QC-10PE64 port 100G QSFP and 10 port 800G OSFP14.4 Tbps with 16GB buffer, Dual Redundant 8-core x86 supervisor
7282R4-32PE32 port 800G OSFP25.6 Tbps with 32GB buffer, Dual Redundant 8-core x86 supervisor

For the 7280R4-32PE the data sheet lists a typical and maximum power draw of 805 W / 1874 W, measured at 25C ambient with 50% load on all ports and excluding transceivers. It is 2 U high, weighs 50.4 lbs (22.86 kg), takes PWR-3211 supplies and needs EOS 4.35.0 at minimum. Arista also says the 2RU platforms introduce a field replaceable supervisor module, so a failed control plane no longer means pulling the whole chassis out of the rack.

Three more points matter if you are comparing against what you run now:

  • Routing scale: Arista quotes over 5M IPv4 routes with 7280R4K, which is the model to look at for full internet tables.
  • Encryption: 7280R4K series platforms support Arista's TunnelSec, using the AES-256-GCM block cipher, with MACsec, IPsec and VXLANsec. Encryption services are an EOS licensed feature, so budget for the license file, not just the hardware.
  • Data center interconnect: ZR modules have a reach of up to 120km, and with Arista's ZR Line System up to 8x 800ZR modules can be multiplexed to transport 6.4 Tb/s over a single fiber pair.

The 7020R4: a new take on the 25G leaf

The 7020R4 is the part of this launch closest to how most of our readers use Arista: 25G server ports with 100G uplinks. Its data sheet gives up to 2 Tbps / 1 Bpps throughput and three 19 inch depth models:

  • 7020R4-48Y-8QC: 48 port 1G/10G/25G SFP28 and 8 port 100G QSFP28, with 2 Tbps wire speed performance and 4GB of buffer.
  • 7020R4-48Y-4QC: 48 port 1G/10G/25G SFP28 and 4 port 100G QSFP28, with 1.4 Tbps wire speed performance and 4GB of buffer.
  • 7020R4-48TX-4QC: 48 port 1G/10G RJ45 and 4 port 100G QSFP28, with 880 Gbps wire speed performance and 4GB of buffer.

The series also comes in a compact form factor with 250mm or 9.8 inch depth, for shallow cabinets and edge rooms. The hardened 7020HR4 models add integrated dual-band L1/L5 GNSS with PRTC-B and Class D timing, which is aimed at mobile backhaul and metro aggregation rather than an office or a data center row. The 19 inch models use PWR-511 power supplies with a 500W output rating.

What this means if you own 7280R3 switches

A launch does not change the switches already in your racks. The announcement says nothing about ending sale or support for any earlier platform, so a 7280R3 or 7050X3 keeps running and keeps getting the EOS releases Arista ships for it until Arista says otherwise in an end of life notice. Arista states that the 7280R4 series run the same Arista EOS software as all Arista products, which means your configurations, automation and CloudVision workflows are built on the same operating system. That does not mean every feature or release behaves the same on both: check the minimum EOS for each new model and Arista's supported features list before you mix generations in one design.

The practical split looks like this:

  • Keep or add 7280R3 when your need is deep-buffered 25G and 100G leaf or spine ports, your fleet already runs a standard EOS image, and you do not need line-rate encryption or 400G and 800G optics. Adding matching units keeps spares, images and runbooks uniform, and it is the shortest path to more ports.
  • Look at R4 when you need 400G or 800G ports, coherent ZR or ZR+ links between sites, wire-speed encryption with TunnelSec, a redundant supervisor in a fixed box (the 7282R4), or a field replaceable supervisor to cut repair time.
  • Look at the 7020R4 when you want a 25G leaf with encryption and timing in a shallow cabinet, or plan to wait for the hardened 7020HR4 for outdoor or cell site work.

How to plan a refresh or an expansion

1. List what you run: each model, its EOS version, its power supplies and its airflow direction. Mixing airflow directions in one row is the most common mistake in a mixed-generation rack. 2. Compare your standard EOS image with the minimum the new model needs. For the 7280R4-32PE that is 4.35.0. If your fleet runs older code, plan the upgrade path first. 3. Decide whether you need encryption. On the 7280R4 it is the R4K models that carry TunnelSec, and it needs a license on top of the hardware. 4. Check power and space. Use the maker's typical and maximum figures for the new model, and measure your current switches at the PDU rather than assuming. 5. Pick the optics before the switch. OSFP and QSFP-DD 800G ports take different modules, and ZR links need the line system parts if you want several waves on one fiber pair. 6. If your project depends on the 7020HR4, plan around early 2027, because Arista lists it as the one product not available now.

In stock at Townsend

We have these Arista switches in stock: an Arista 7280R Series switch (7280R3 generation), an Arista 7280R Series switch (7280R3 generation, K model) and an Arista 7050X3 Series switch. Browse the Arista 7280R3 collection or all Arista switches, or send your list through the quote page.

¿Necesita ayuda para planificar su próximo paso?

Hardware probado y con garantía, con disponibilidad real, y ofertas en efectivo por el equipo dado de baja. Las cotizaciones las responde una persona.

Siga leyendo