Skip to content
Townsend Networks
Product line guidePublished

Juniper EX4300: 24P, 48T, 48P, 32F and 48MP Compared

Models covered: EX4300-24T, EX4300-24P, EX4300-32F, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48MP

The maker's warnings

  • Do not mix AC and DC power supplies, or power supplies and fan modules with different airflow labels (AIR IN (AFI) and AIR OUT (AFO)), in the same chassis.[S1]
  • Remove only one fan module at a time; the switch keeps running for 30 seconds without thermal shutdown while a fan module is out.[S1]
  • Both fan modules must be installed for the switch to work as designed.[S1]

Juniper's EX4300 is a line built for high port density and redundancy, used in large branch offices, campus wiring closets and data center racks. It comes with 24, 32 or 48 ports, with or without PoE+, and it takes redundant power supplies and fans. This guide sets the models side by side from Juniper's EX4300 Switch Hardware Guide and Juniper's end of life page, with the supplies, fans and uplink modules each one needs.

The short answer

For a wiring closet with phones and access points, the EX4300-48P and EX4300-24P put PoE+ on every network port, and the EX4300-48T and EX4300-24T are the same switches without PoE. For fiber to the desk or to other closets, the EX4300-32F has 32 SFP ports, four SFP+ ports and two QSFP+ ports. For newer access points that need more than a gigabit and more power, the EX4300-48MP has 24 ports that run up to 10 Gbps and supports PoE++.

The models side by side

ModelNetwork portsBuilt-in uplinksShipped with
EX4300-24T24 x 10/100/1000BASE-T, no PoE4 x 40GbE QSFP+Two AIR OUT (AFO) fan modules, one 350 W AC supply
EX4300-24P24 x 10/100/1000BASE-T, PoE+4 x 40GbE QSFP+Two AIR OUT (AFO) fan modules, one 715 W AC supply
EX4300-32F32 x 1GbE SFP4 x 10GbE SFP+, 2 x 40GbE QSFP+Two AIR OUT (AFO) fan modules, one 350 W AC supply
EX4300-48T48 x 10/100/1000BASE-T, no PoE4 x 40GbE QSFP+Two AIR OUT (AFO) fan modules, one 350 W AC supply
EX4300-48T-AFI48 x 10/100/1000BASE-T, no PoE4 x 40GbE QSFP+Two AIR IN (AFI) fan modules, one 350 W AC supply
EX4300-48P48 x 10/100/1000BASE-T, PoE+4 x 40GbE QSFP+Two AIR OUT (AFO) fan modules, one 1100 W AC supply
EX4300-48MP24 x 10/100/1000BASE-T and 24 x 100/1000/2500/5000/10000BASE-T, PoE++4 x 40GbE QSFP+ (Virtual Chassis only)Two AIR OUT (AFO) fan modules, one 1400 W AC supply

The -S versions of these models, such as the EX4300-48P-S, ship without fan modules or power supplies, which are bought separately. Juniper says the EX4300-48MP network ports provide up to 95 watts of power. Every model is 1.72 in. high and 17.36 in. wide, 19 in. across the front mounting brackets. Without power supplies or fans the chassis weighs 13 lb, or 16.42 lb for the EX4300-48MP; each 350 W supply adds 2.4 lb and each fan module 0.33 lb.

Each EX4300 has one slot for an optional uplink module, and the module has to match the model. The 24 and 48 port copper models other than the 48MP take the EX-UM-4X4SFP, with four ports for SFP or SFP+ transceivers that can also serve as Virtual Chassis ports with SFP+ optics. The EX4300-32F takes the EX-UM-2QSFP, with two QSFP+ ports, or the EX-UM-8X8SFP, with eight SFP or SFP+ ports. The EX4300-48MP takes the EX-UM-2QSFP-MR, for 40GbE or 100GbE, or the EX-UM-4SFPP-MR, for 1GbE or 10GbE. On the EX4300-48MP, running both EX-UM-2QSFP-MR ports at 100 Gbps disables the four built-in QSFP+ ports.

Power supplies, fans and airflow

EX4300 AC supplies come in 350 W, 715 W, 1100 W and 1400 W ratings, and only the EX4300-48MP takes the 1400 W supply. The PoE power a switch can deliver depends on which supplies are installed and how they are configured; in an N+0 configuration, lower priority PoE ports may lose power if a supply fails. Each AC inlet needs its own dedicated feed.

Cooling comes from two fan modules plus a fan in each power supply. The fan module for front-to-back airflow is the EX4300-FAN, labeled AIR OUT (AFO), and for back-to-front airflow the EX4300-FAN-AFI, labeled AIR IN (AFI). That is why the EX4300-48T-AFI exists: the same switch, shipped with fans and a supply that pull air the other way, for racks where the switch's port side faces the hot aisle.

Virtual Chassis

Up to 10 EX4300 switches can be joined into one Virtual Chassis, and by default the built-in QSFP+ ports are set as Virtual Chassis ports. The EX4300-48MP has rules of its own: only its built-in QSFP+ ports can be Virtual Chassis ports, it joins a Virtual Chassis with other EX4300 switches only, and in a Virtual Chassis that includes it, the other EX4300 switches can only take the line card role. The EX4300 also supports MACsec, which Juniper rates at 88 Gbps of near line-rate encryption across its Gigabit and 10 Gigabit Ethernet ports.

End of life notices that touch the EX4300

Two notices on Juniper's EX Series end of life page bear on the EX4300. Bulletin TSB109284 covers the EX4300-48MP, its two -MR uplink modules and its 1400 W supply, JPSU-1400-AC-AFO. Bulletin TSB105633 covers the EX4300-32F and, with it, the JPSU-350-AC-AFO and JPSU-350-AC-AFI supplies and the EX4300-FAN and EX4300-FAN-AFI fan modules, which are the two fan modules Juniper lists for the EX4300.

NoticeEOL AnnouncedLast OrderEnd of Hardware Failure AnalysisEnd of EngineeringLast Software VersionEnd of Support
TSB109284 (EX4300-48MP)06/29/202612/29/202612/29/202712/29/202925.412/29/2031
TSB105633 (EX4300-32F, fan modules, JPSU-350 supplies)03/31/202603/31/202603/31/202703/31/202721.403/31/2029

For an EX4300 owner, the practical step is spares: the EX4300-FAN and EX4300-FAN-AFI fan modules are past their last order date with Juniper, so keep spares on the shelf for every closet that depends on an EX4300.

In stock at Townsend

In stock now: the EX4300-48T, the EX4300-48T-AFI, the EX4300-24P and the EX4300-48MP, with spare EX4300-FAN-AFI fan modules.

Where to look

The EX4300 page lists every EX4300 in stock, Juniper power supplies the JPSU supplies, and EX accessories the rack kits and Virtual Chassis cables. For the end of sale dates on their own, read Juniper EX4300 end of sale dates; for the newer access switches, read Juniper's newer EX switches compared. Request a quote for a configuration that is not listed, or sell the switches you retire.

Sources

Checked against the maker's documents on .

  1. S1EX4300 Switch Hardware GuideJuniper Networks (Hewlett Packard Enterprise) · Document: EX4300 Switch Hardware Guide (PDF) · Revision: Published 2025-08-12 · Section: EX4300 System Overview (Hardware Overview, tables 1 to 6, Physical Specifications table 10); Cooling System and Airflow (table 27); EX4300 Power System (AC power supplies, N+0 redundancy) · August 12, 2025

  2. S2EX Series Hardware Dates & MilestonesJuniper Networks · Document: End of Life Products and Milestones: EX Series hardware · Revision: Page as read 2026-11-04 · Section: TSB109284 End of Life Announcement: EX4300-48MP; TSB105633 End of Life Announcement: EX4300-32F Product · November 4, 2026

In stock now

EX4300-48T Juniper Switch, Front-to-Back, Refurbished, 48x 1GbE RJ45 and 4x 40GbE QSFP+

EX4300-48T

EX4300-48T Juniper Switch, Front-to-Back, Refurbished, 48x 1GbE RJ45 and 4x 40GbE QSFP+

In stock

$145Ships same day
EX4300-48T-AFI Juniper Switch, Back-to-Front, Refurbished, 48x 1GbE RJ45 and 4x 40GbE QSFP+

EX4300-48T-AFI

EX4300-48T-AFI Juniper Switch, Back-to-Front, Refurbished, 48x 1GbE RJ45 and 4x 40GbE QSFP+

In stock

$235Ships same day
EX4300-24P Juniper Switch, Front-to-Back, Refurbished, 24x 1GbE PoE+ RJ45 and 4x 40GbE QSFP+

EX4300-24P

EX4300-24P Juniper Switch, Front-to-Back, Refurbished, 24x 1GbE PoE+ RJ45 and 4x 40GbE QSFP+

In stock

$590Ships same day
EX4300-48MP Juniper Switch, Front-to-Back, 48x 1GbE PoE++ RJ45 (24 × 10GbE) and 4x 40GbE QSFP+

EX4300-48MP

EX4300-48MP Juniper Switch, Front-to-Back, 48x 1GbE PoE++ RJ45 (24 × 10GbE) and 4x 40GbE QSFP+

In stock

$2,465Ships same day

Need help planning your next move?

Tested, warrantied hardware with real availability, and cash offers for decommissioned gear. Quotes answered by a human.