Skip to content
Townsend Networks
Product line guidePublished

Juniper EX2300: 24P, 48P, 48MP and EX2300-C Compared

Models covered: EX2300-C-12T, EX2300-C-12P, EX2300-24T, EX2300-24P, EX2300-24MP, EX2300-48T, EX2300-48P, EX2300-48MP

The maker's warnings

  • IEEE 802.3at class 4 powered devices require category 5 or higher Ethernet cables.[S1]
  • Do not block the vents on the chassis; doing so can lead to overheating of the switch chassis.[S1]
  • After powering on the switch, wait for at least 60 seconds before powering it off, and after powering it off, wait at least 60 seconds before powering it back on.[S1]

Juniper's EX2300 is the entry access switch of the EX Series, for branch and remote offices and campus wiring closets, and it runs the same Junos OS as the larger EX switches. The line comes with 12, 24 or 48 RJ-45 ports, and the compact, fanless EX2300-C has 12. This guide sets the models side by side from Juniper's EX2300 Switch Hardware Guide and Juniper's end of life page: ports, Power over Ethernet budgets, power draw, cooling, weight, Virtual Chassis and the dates that now apply to the whole line.

The short answer

Choose by what plugs in. For desks and printers that need no power, the EX2300-24T and EX2300-48T give 24 or 48 gigabit copper ports without PoE. For phones, access points and cameras, the EX2300-24P and EX2300-48P put PoE or PoE+ on every port, with 370 W and 740 W to share. For newer Wi-Fi access points that want more than a gigabit, the EX2300-48MP adds 16 ports that run at 2.5 Gbps. For a classroom, a shop floor or a small office with no closet, the EX2300-C-12P or EX2300-C-12T has 12 ports and no fans.

The models side by side

ModelAccess portsPoE budgetUplinks (10GbE SFP+/SFP)Weight
EX2300-C-12T12 x 10/100/1000, no PoENone25.45 lb (2.48 kg)
EX2300-C-12P12 x 10/100/1000 PoE/PoE+124 W26.99 lb (3.17 kg)
EX2300-24T24 x 10/100/1000, no PoENone47.25 lb (3.29 kg)
EX2300-24P24 x 10/100/1000 PoE/PoE+370 W49.89 lb (4.49 kg)
EX2300-24MP8 x 100/1000/2500 and 16 x 10/100/1000, all PoE/PoE+380 W48.8 lb (4 kg)
EX2300-48T48 x 10/100/1000, no PoENone48.28 lb (3.76 kg)
EX2300-48P48 x 10/100/1000 PoE/PoE+740 W411.06 lb (5.02 kg)
EX2300-48MP16 x 100/1000/2500 and 32 x 10/100/1000, all PoE/PoE+740 W614.33 lb (6.5 kg)

The uplinks take SFP or SFP+ transceivers and do not carry PoE. The EX2300-C is 1.72 in. high and 10.98 in. wide. Apart from the multigigabit models, the 24 and 48 port switches without PoE are 10.2 in. deep and those with PoE 12.2 in.

Power over Ethernet and power draw

PoE and PoE+ run on all RJ-45 access ports of the PoE models, and the budget in the table is the most the switch can deliver across those ports together. Juniper lists the switch's own maximum draw, with no PoE power drawn, as 24 W for the EX2300-C-12P, 80 W for the EX2300-24P, 100 W for the EX2300-48P and 90 W for the EX2300-48MP. Add the PoE load you expect to those figures when you size a circuit or a UPS. The power supply is built in along the rear panel, with an AC cord inlet, or DC terminals on the EX2300-24T-DC, so a failed supply means a replacement switch rather than a swap. The AC cord has a C13 coupler to IEC standard 60320.

Cooling and where the switch can sit

The 24 and 48 port models other than the multigigabit ones have two built-in fans at the rear that cool front to back. The EX2300-24MP has three fans and the EX2300-48MP four, along the right side panel, and both cool side to side, which matters in a narrow cabinet. The EX2300-C has no fans and no exhaust openings: it cools through vents on top and, on the PoE model, a heatsink on the rear panel, which is why it suits a desk or a wall.

Virtual Chassis

Up to four EX2300 switches, EX2300-C models included, can be joined into one Virtual Chassis over uplink ports set as Virtual Chassis ports. The EX2300 lets you mix models in one Virtual Chassis, so a 48P and a 24T can be managed as one switch. The links must use SFP+ optics or cables, because a Virtual Chassis cannot be formed with SFP transceivers. Licensing matters here: Juniper's model table shows the Virtual Chassis license as available on the -VC part numbers, such as the EX2300-24P-VC, and not on the base model, and its planning notes say you must have license keys for all the devices.

End of life: what the dates mean for an EX2300 owner

Juniper has announced the end of life of the EX2300 in bulletin TSB107683. The notice covers every model in this guide, from the EX2300-C-12T to the EX2300-48MP and their -VC and -TAA versions.

EOL AnnouncedLast OrderEnd of Hardware Failure AnalysisEnd of EngineeringLast Software VersionEnd of Support
04/30/202609/30/202609/30/202709/30/202925.409/30/2031

The last order date has passed, so Juniper no longer takes orders for new EX2300 switches and units now come from existing stock. Juniper keeps supporting the line until 09/30/2031, with 25.4 as the last software version, which leaves an installed EX2300 years of supported service. For a spare or an extra closet that has to match switches already in place, that makes the EX2300 a sound buy; for a brand new campus, weigh it against the newer EX lines.

In stock at Townsend

In stock now: the EX2300-48P, the EX2300-24P, the EX2300-48MP, the EX2300-24T, the EX2300-C-12P and the EX2300-C-12T.

Where to look

The EX2300 page lists every EX2300 in stock, the EX Series page the rest of the line, and EX accessories the rack kits and cables. For the end of life notice on its own, read Juniper EX2300 end of life; for the next step up, read Juniper's newer EX switches compared. Request a quote for a configuration that is not listed, or sell the switches you retire.

Sources

Checked against the maker's documents on .

  1. S1EX2300 Switch Hardware GuideJuniper Networks (Hewlett Packard Enterprise) · Document: EX2300 Switch Hardware Guide (PDF) · Revision: Published 2025-08-12 · Section: EX2300 System Overview (Hardware Overview, Switch Models table 1, Physical Specifications table 3); EX2300 Cooling System; EX2300 Power System (table 14, power cord); EX2300 Virtual Chassis · August 12, 2025

  2. S2EX Series Hardware Dates & MilestonesJuniper Networks · Document: End of Life Products and Milestones: EX Series hardware · Revision: Page as read 2026-11-04 · Section: TSB107683 End of Life Announcement: EX2300 · November 4, 2026

In stock now

EX2300-48P Juniper Switch, AC Power, Refurbished, 48x 1GbE PoE+ RJ45 and 4x 1/10GbE SFP+

EX2300-48P

EX2300-48P Juniper Switch, AC Power, Refurbished, 48x 1GbE PoE+ RJ45 and 4x 1/10GbE SFP+

In stock

$155Ships same day
EX2300-24P Juniper Switch, AC Power, Refurbished, 24x 1GbE PoE+ RJ45 and 4x 1/10GbE SFP+

EX2300-24P

EX2300-24P Juniper Switch, AC Power, Refurbished, 24x 1GbE PoE+ RJ45 and 4x 1/10GbE SFP+

In stock

$290Ships same day
EX2300-48MP Juniper Switch, Refurbished, 48x 1GbE PoE+ RJ45 (16 × 2.5GbE) and 6x 10GbE SFP+

EX2300-48MP

EX2300-48MP Juniper Switch, Refurbished, 48x 1GbE PoE+ RJ45 (16 × 2.5GbE) and 6x 10GbE SFP+

In stock

$1,875Ships same day
EX2300-24T Juniper Switch, Front-to-Back, Refurbished, 24x 1GbE RJ45 and 4x 1/10GbE SFP+

EX2300-24T

EX2300-24T Juniper Switch, Front-to-Back, Refurbished, 24x 1GbE RJ45 and 4x 1/10GbE SFP+

In stock

$530Ships same day

Need help planning your next move?

Tested, warrantied hardware with real availability, and cash offers for decommissioned gear. Quotes answered by a human.